Updated: 22 November 2026
The three main plastic 3D printing processes side by side: strengths, weaknesses, typical uses and cost.
For plastic parts you will mostly meet three processes. They differ in raw material, surface and price.
Molten plastic is laid down line by line. FDM is the least expensive process, offers the widest choice of colours and engineering materials, and suits housings, brackets, spare parts and jigs. At 3D Druck Berlin we manufacture in FDM only.
A laser or screen cures liquid resin layer by layer. The result is very fine and smooth, but more brittle and sensitive to UV light. Typical for miniatures, jewellery patterns and dental work.
Powder is fused by a laser (SLS) or by heat and a binding agent (MJF). The surrounding powder supports the part, so nested shapes are possible. Parts are similarly strong in every direction. These processes pay off mainly for small parts in higher quantities.
Plainly put: If your part is a better fit for SLA or SLS, we will tell you before you order.
For fine detail, yes. For functional dimensions we reach ±0.2 mm in PLA with FDM, which is enough for most everyday fits.
FFF (fused filament fabrication) is the vendor-neutral name for the same process as FDM.
Upload a file, pick a material, see the price. From 1 piece, dispatched in 1 working day or picked up in Berlin.
Upload your file and see the price at once. Without a file, a photo with dimensions is enough.