Discontinued plastic part? Send photos and measurements, we remake it.

Updated: · Prices apply to orders from this date

3D Druck Berlin recreates discontinued plastic parts from photos, measurements or the original. It works for vintage appliances, classic cars, bikes, garden and workshop equipment. We model the part in CAD (€60 per started hour net, usually 1 to 2 hours), print it in PETG, ASA or TPU in Berlin and ship it across Germany by DHL from €4.19. Photos and dimensions are enough to get started.

What we can remake

  • Vintage and older household appliances: knobs, switch caps, handles, covers, battery lids, feet, hinges, gears
  • Classic cars and motorbikes: air vents, trim, clips, interior parts (ASA for UV and heat up to 95 °C), see also classic-car and vehicle parts
  • Bikes, garden and workshop: brackets, adapters, guides, holders
  • Flexible parts in TPU 95A: seals, bumpers, hose sleeves, feet

How to measure for a remake, step by step

  1. Photograph the part from all sides, including the broken faces, with a ruler or calliper in the picture.
  2. Note the key dimensions: overall length, width and height, hole diameters, wall thickness, slot widths.
  3. Add context: the appliance brand and model number, where the part sits, what it has to carry or resist (heat, water, force).
  4. Send it to us. If the original survives, post it or drop it off in Prenzlauer Berg. A physical sample gives the most accurate result.
  5. Receive the design and the price. For photos and dimensions we send a design and price within 24 hours. After you approve, we print and dispatch within 1 working day.

Shipping within Germany

OptionPrice
DHL Päckchenfrom €4.19
DHL parcelfrom €6.19
Pickup, Fröbelstraße 11c, Berlin Prenzlauer Berg€2.25
Express, same-day dispatch+€50 per order
Berlin courier, same or next working day€30 instead of shipping

DHL takes 1 to 2 working days after dispatch. Details on shipping & lead time.

What it costs

  • Modelling from photos, measurements or the original: €60 per started hour net
  • Printing: weight × price per gram + print time × €1.50 + €3.90 base fee, plus 19 % VAT. Minimum order €8.90 net (€10.59 gross).
  • Example: a PETG spare gear, 22 g, costs €12.96 incl. VAT to print.
  • Reorders cost only the print. We keep your file for six months.

When 3D printing is the wrong answer

Appliance parts that sit near heating elements, carry permanent tensile load or touch food are not a good fit. The limits are temperatures above 95 °C, permanent tensile load and food contact. If your part is in that category we will tell you before you pay.

Common questions

Can you recreate a discontinued plastic part from measurements only?

Yes. Photos from all sides with a ruler in the picture plus the key dimensions are enough for most brackets, knobs, clips and covers. The original part gives the most accurate result.

Can you make a replacement part for a vintage appliance and ship it within Germany?

Yes. We print in Berlin and ship by DHL across Germany from €4.19. Dispatch is within 1 working day of payment once the design is approved, and DHL takes 1 to 2 working days.

Which material for an old appliance part?

PETG for everything indoors, tough and dimensionally stable up to 75 °C. ASA for outdoors and car parts, UV-stable and dimensionally stable up to 95 °C. TPU 95A for seals, feet and bumpers.

How much does a discontinued part cost?

Modelling is €60 per started hour net (usually 1 to 2 hours) plus the print price. Most household parts cost between €10.59 and €20 to print.

What to send

  • Photos from all sides, ruler in the picture
  • Length, width, height, hole diameters
  • Appliance brand and model number
  • Or the original by post

Design and price within 24 hours

Recommended

Indoors
PETG, up to 75 °C
Outdoors / car
ASA, up to 95 °C
Flexible
TPU 95A
Modelling
€60 per started hour net
Start with photos and dimensions

Start with photos and dimensions

Design and price within 24 hours, printed in Berlin, shipped across Germany.

Start with photos and dimensions