3D printing basics: from model to finished part

Updated:

How 3D printing works, the steps between an idea and a finished part, and what beginners really need to know.

A 3D printer builds an object by adding material one layer at a time. Nothing is milled and no mould is cast, which is why the process already makes sense for a single piece.

The process in four steps

  1. 3D model. Everything starts with a file that describes the shape. You design it yourself, download it or have it made.
  2. Slicing. Software cuts the model into thin layers and calculates the nozzle paths. Layer height, infill and supports are decided here.
  3. Printing. In FDM printing a nozzle melts plastic wire (filament) and lays it down line by line. A fist-sized part usually takes two to six hours.
  4. Finishing. Removing supports, deburring edges and, if needed, sanding, painting or setting threaded inserts.

What 3D printing does well

  • One-offs and small batches without tooling costs
  • Spare parts that are no longer sold
  • Prototypes that will change again tomorrow
  • Shapes that cannot be milled: cavities, lattices, internal channels

Where the limits are

  • Visible layers. Without finishing, a printed part does not look like an injection-moulded one.
  • Strength depends on direction. A part is weaker across its layers than along them, so its position in the printer affects how much load it takes.
  • Large quantities. From several hundred to a thousand identical parts, injection moulding is usually cheaper.
  • Heat. Standard plastics such as PLA soften from about 55 °C. There are better materials for a dashboard.

Rule of thumb: The more precisely you can say what the part has to withstand (force, temperature, weather, looks), the better material and print settings can be chosen.

FAQ

Do I need a finished file?

No. A photo with dimensions or the broken original is often enough to rebuild the model. A print-ready file makes things faster and cheaper.

How strong are printed parts?

Strong enough for brackets, housings, moderately loaded gears and jigs. Material, wall thickness and print orientation make the difference.

How big can a part be?

That depends on the build volume. Ours is 330 × 320 × 320 mm in one piece. Larger objects are split and glued or bolted together.

Straight to the price

Upload a file, pick a material, see the price. From 1 piece, dispatched in 1 working day or picked up in Berlin.

Get an instant price

Upload a part and see the price

Upload your file and see the price at once. Without a file, a photo with dimensions is enough.

Get an instant price