Updated: 15 November 2026 · Prices apply to orders from this date
We print with Bambu Lab and Polymaker filaments, each material with a proven profile. More choice does not make quotes better, only slower.
€0.12/g · 27 colours in stock
The standard for visible parts, models and prototypes. Stiff, dimensionally accurate, very good surface. Not for above 55 °C or permanent outdoor use.
€0.14/g · 15 colours in stock
For parts under load: brackets, housings, clips, adapters. Tougher than PLA, holds up to 75 °C, slightly glossy.
€0.19/g · 1 colour in stock, more to order
Flexible like a hard rubber. Seals, feet, cases, dampers, belts. Slow to print, hence more expensive.
€0.17/g · 2 colours in stock, more to order
For outdoors: UV-stable, weatherproof, up to 95 °C. The material for garden tools, bikes, balconies and cars.
€0.24/g · Black
Carbon-fibre reinforced PLA: very stiff, deep matte black surface, no visible layers. For visible parts with a technical look.
PA, PC, PETG-CF, wood, silk, glow
Ordered for your job, lead time +3 working days. Colours from the Bambu Lab range.
In the calculator you choose from the complete Bambu Lab and Polymaker colour ranges, several hundred colours across more than 40 materials. Colours marked ● are in stock and ship within 1 working day; colours marked ○ are ordered from the manufacturer for your job at no surcharge, which takes at least 7 working days until dispatch.
Every Bambu Lab material we print has a datasheet: properties in plain words, everyday use, print settings, figures from the manufacturer TDS and a comparison with Polymaker and SUNLU. ● in stock (dispatched in 1 working day), ○ to order (at least 7 working days).
0.20 mm is the standard: good surface, sensible time. 0.12 mm for figures and lettering, 0.08 mm for miniatures. 0.28 mm for large parts with no visual demands. Infill sets weight and strength: 15 % for decor, 30 % for almost everything, 50 % for brackets under load, 100 % for gears and parts that get machined afterwards.
The calculator shows at once what the difference costs.