What does 3D printing cost in Berlin? Prices with worked examples

Updated: · Prices apply to orders from this date

In short: a single part usually costs €10.59 to €35 incl. VAT. A 10 cm PETG bracket costs about €18. At 50 pieces the unit price drops by 20 %, so a 25 g bracket costs about €8 each including the base fee and quantity surcharge. The calculator shows the exact price for your file immediately.

All prices incl. 19 % VAT unless stated otherwise.

How is the price calculated?

Price = weight × material price per gram + print time × €1.50 per hour + €3.90 base fee, plus 19 % VAT. Minimum order €8.90 net, which is €10.59 incl. VAT.

File check, support removal and an invoice are included. The base fee is charged once per order; from the 11th piece a €2 quantity surcharge per further piece is added.

Prices by size

Small parts up to 5 cm cost €10.59 to €13, medium parts up to 10 cm €12 to €23, large parts up to 20 cm €21 to €95. Weight and print time decide the price, not edge length alone.

SizeTypical weightPrice per piece incl. VAT
up to 5 cm5 to 25 g€10.59 to €13
5 to 10 cm25 to 60 g€12 to €23
10 to 20 cm60 to 300 g€21 to €95
over 20 cm, up to 30 × 32 × 32 cmfrom 300 gfrom about €90

Prices by material

PLA is the cheapest at €0.12 net per gram; PETG costs €0.14, ASA €0.17, TPU €0.19 and PLA-CF €0.24.

MaterialUseper g netper g incl. VAT
PLAmodels, jigs, prototypes, up to about 55 °C€0.12€0.14
PETGfunctional and replacement parts, up to about 75 °C€0.14€0.17
ASAoutdoor, automotive, up to about 95 °C€0.17€0.20
TPU 95Aflexible parts€0.19€0.23
PLA-CFstiff, light parts€0.24€0.29

ASA, TPU and PLA-CF add €10 per order for drying and handling (hardened nozzle, dry box, enclosed chamber).

Worked examples for typical parts

A 10 cm PETG bracket (45 g, 3.4 hours of print time) costs about €18 incl. VAT: €6.30 material, €5.05 print time, €3.90 base fee, plus VAT.

3D-printed 10 cm bracket next to a ruler
Illustration: 10 cm bracket, PETG.
PartSettingsWeightPrint timeNetIncl. VAT
Sensor or camera bracketPETG, 0.20 mm, 50 %25 g1.9 h€10.30€12.26
Gear, replacement partPETG, 0.12 mm, 100 %22 g2.9 h€11.33€13.48
10 cm bracket / adapter flangePETG, 0.20 mm, 50 %45 g3.4 h€15.25€18.15
Drilling jigPLA, 0.20 mm, 30 %60 g4.4 h€17.75€21.12
Electronics enclosure, 2 partsPETG, 0.16 mm, 30 %80 g7.4 h€26.23€31.21
Trade-show model 200 mmPLA, 0.20 mm, 15 %300 g21.6 h€72.27€86.00

Examples with the standard 0.4 mm nozzle, calculated with the calculator's formula. Excluding shipping and the pickup fee.

What does a prototype cost?

A prototype usually costs €12 to €90 incl. VAT. A two-part 80 g electronics enclosure costs €31.21. A second iteration again costs only the print; there are no tooling or set-up costs.

Two-part 3D-printed electronics enclosure in light grey
Illustration: enclosure prototype, two parts.

Small batch: what do 50 parts cost?

At 50 pieces a 20 % volume discount applies to the unit price; the base fee and a €2 quantity surcharge per piece above 10 are added. Guide prices per piece incl. VAT: 4 g PLA cable clip about €3.10, 25 g PETG bracket about €8.10, 80 g PETG enclosure about €23. We ship across Germany.

Fifty identical blue cable clips in a grid
Illustration: a small batch of 50 pieces.
PartMaterial1 piece50 pieces totalper piece
Cable clip, 4 gPLA€10.59€153.80€3.08
Sensor bracket, 25 gPETG€12.26€404.65€8.09
Enclosure, 80 gPETG€31.21€1,162.94€23.26

Per piece = total divided by 50, so including the base fee and the quantity surcharge (at 50 pieces 40 × €2 = €80 net). Excluding shipping.

QuantityDiscount on the unit price
from 55 %
from 1010 %
from 2515 %
from 5020 %
from 250series price on quotation

The base fee is charged once per order. Injection moulding usually pays off only from about 1,000 pieces of one part, because tooling costs €2,000 to €8,000.

Surcharges, shipping and pickup

ItemPrice
Express, same-day dispatch+ €50 per order
Courier within Berlin€30
Multi-colourfrom €5 per colour group
Drying and handling (ASA, TPU, PLA-CF)€10 per order
Threaded inserts€0.90 each
Sanding and smoothingfrom €6 per piece
Priming and paintingfrom €18 per piece
DHL Päckchen / parcelfrom €4.19 / from €6.19
Pickup, Prenzlauer Berg€2.25

No 3D file?

Without a file we model the part for €60 net per started hour, usually 1 to 2 hours. After that every piece costs only the print.

Step by step: have a plastic part remade.

Common questions about cost

FDM-printed gear with layer lines next to a smooth resin gear
Illustration: FDM (left) and resin (right) compared.
How much does it cost to get a custom part 3D printed in Berlin?

A single part usually costs €10.59 to €35 incl. VAT at 3D Druck Berlin. The minimum order is €10.59. A 10 cm PETG bracket costs about €18.

How much does a 3D printed prototype cost in Berlin?

A prototype usually costs €12 to €90 incl. VAT, depending on weight and print time. A two-part 80 g PETG electronics enclosure costs €31.21; a 200 mm, 300 g PLA trade-show model costs €86.00.

How much does small-batch 3D printing cost for 50 plastic parts in Germany?

At 50 pieces a 20 % volume discount applies to the unit price; the base fee and a €2 quantity surcharge per piece above 10 are added. A 4 g PLA cable clip then costs about €3.10 each, a 25 g PETG bracket about €8.10 and an 80 g enclosure about €23, all incl. VAT, shipped anywhere in Germany.

How is the price calculated?

Weight × material price per gram + print time × €1.50 per hour + €3.90 base fee, plus 19 % VAT. From the 11th piece a €2 quantity surcharge per further piece is added. The minimum order is €8.90 net.

FDM or resin: which is cheaper?

For functional parts from about 3 cm, FDM is usually cheaper and tougher. Resin pays off for very small, detailed parts such as miniatures. We print with FDM.

How durable are the parts?

PETG is tough and stable up to about 75 °C, ASA up to about 95 °C and UV-resistant, PLA up to about 55 °C. For loaded parts we recommend walls of 2 mm or more.

What is the turnaround time?

Materials and colours in stock are dispatched within one working day; DHL takes 1 to 2 working days. Other colours are ordered in and take at least 7 days. Express with same-day dispatch costs €50 extra per order.

Which file formats do you accept?

STL, 3MF, OBJ and STEP in the calculator with an instant price. Native CAD files and G-code are accepted with a manual quote within 24 hours.

Is the calculated price binding?

Yes. You pay the price shown online. We check the file after payment and refund you if it cannot be printed.

Is there a discount for students and schools?

Yes, 15 % on all prices for students and educational institutions.

At a glance

Minimum order
€10.59 incl. VAT
10 cm bracket, PETG
€18.15
80 g enclosure, PETG
€31.21
50 cable clips
€153.80, €3.08 each
No file
€60 net per hour
Instant price Small series

Get the price for your file

Upload STL, 3MF, OBJ or STEP. The price is ready in about 30 seconds, no account needed.

Instant price