What no longer exists, we print again

Updated: · Prices apply to orders from this date

3D Druck Berlin reproduces plastic spare parts the manufacturer no longer supplies: from your STL file at an instant price from €10.59, without a file from photos, measurements or the broken original for €60 per started modelling hour plus the print price. PETG indoors, ASA for car and garden, TPU for flexible parts. Dispatched within 1 working day of payment, pickup in Berlin Prenzlauer Berg.

The bracket on the dishwasher, the clip on the bike bag, the gear in the mixer. With a file instantly, without one from a photo or the original.

With a file: price in 30 seconds

Many spare parts already exist as STL on Printables, Thingiverse or MakerWorld; search for brand, model and part name. Drop the file into the instant-quote calculator, choose material and infill, see the price, pay online. For spare parts we recommend PETG (tough, up to 75 °C) or ASA (outdoors, car, up to 95 °C) at 50 to 100 % infill. If the manufacturer only has a drawing left, that works too; we model from it.

Without a file: reproduction from photo, measurements or original

No problem, that is how most spare-part orders reach us. The process:

  1. Send photos or the original. Photos from all sides with a ruler or calliper in the picture, plus the three key dimensions (length, hole spacing, diameter). Or post the broken part to our collection point, even in two halves.
  2. Modelling. We redraw the part in CAD and fix the weak spot where the original broke: thicker wall, radius instead of a sharp corner, snap fit 0.3 mm longer. €60 per started hour; brackets and clips usually one hour, gears and housing parts with fits up to two. We name the price beforehand.
  3. Printing. After your go-ahead we print in PETG, ASA or TPU and dispatch within 1 working day, or hold the part for pickup.
  4. The file is yours. The STL comes with the delivery. Reordering costs only the print, as often as you like.

Examples and prices

Typical spare parts from home, bathroom, garden and workshop with the print price from our formula. Without a file, add the one-off modelling fee, one hour for every part below, i.e. €60.

PartMaterial, layerWeightQtyPrint price
Roller-shutter end-stop gliders, pairPETG, 0.20 mm6 g2€10.59 (€2.03 each)
Dishwasher upper-rack wheel caps, 4 piecesPETG, 0.20 mm4 g4€10.59 (€1.44 each)
Shower-door guidePETG, 0.20 mm18 g1€10.59
Kitchen-machine gear, 100 % infillPETG, 0.12 mm22 g1€13.48
Remote-control battery lidPETG, 0.16 mm12 g1€10.59
Awning end cap, outdoorsASA, 0.20 mm35 g1€28.35
Vacuum-hose sleeve, flexibleTPU 95A, 0.20 mm9 g1€19.99

Print prices incl. 19 % VAT for pickup, calculated with the calculator's formula (weight × price per gram + print time × €1.50 + €3.90 base fee, minimum order €8.90 net). ASA and TPU: incl. €10 drying and handling per order. Shipping by DHL size from €4.19, pickup €2.25. All prices on the pricing page.

PETG or ASA?

PETG is the material for everything indoors: tough rather than brittle, dimensionally stable up to 75 °C, resistant to water, oil and cleaning agents. Dishwasher parts survive in PETG on normal programmes; for intensive programmes above 70 °C we use ASA. ASA is the material for outdoors and for the car: UV-stable, does not yellow, dimensionally stable up to 95 °C, so also behind a windscreen in summer. It costs €0.17 instead of €0.14/g plus €10 drying and handling per order, because we print it in the enclosed chamber. TPU 95A is for anything that should give: seals, appliance feet, bumpers, hose sleeves. We do not recommend PLA for spare parts; it deforms from 55 °C and breaks under permanent load; for decorative covers without function it is fine.

How long does a printed spare part last?

Designed and printed properly, often longer than the injection-moulded part it replaces. The original usually broke at a thin spot the manufacturer made that way to save material; we make walls 2 mm or thicker, lay the print layers across the load so the part cannot split along a layer, and print gears at 100 % infill with 0.12 mm layers. For clips and snap fits we allow 1.2 mm thickness and a radius at the root. What FDM printing cannot do: temperatures above 95 °C, permanent tensile load on thin webs, and food contact. We tell you before printing, and if a part is unsuitable we do not print it.

What works well

  • Brackets, clips, hooks, lids, knobs, covers, end caps
  • Gears and pinions for kitchen machines, robot mowers, shutter drives (PETG, 100 % infill, PA on request)
  • Housing parts, covers, battery lids, hinges
  • Dishwasher wheel caps, shutter gliders, shower-door guides, window handles
  • Adapters between two parts that were never meant to fit: vacuum to power tool, hose to pump
  • Parts for classic cars, cars, motorbikes and bikes, caravans, boats, toys, aquarium equipment

What does not

Parts that get hotter than 95 °C, sit under constant tensile load or must be food-safe need other processes. We tell you before printing. Safety-relevant vehicle parts (brakes, steering, belts, airbag) we do not print, nor pressure vessels or mains-voltage parts without an enclosure.

Lead time

With a file: dispatched within 1 working day of payment, DHL takes 1 to 2 working days, express leaves us the same working day. Pickup at our collection point, Fröbelstraße 11c in Prenzlauer Berg, is often possible the next day. Without a file: modelling usually takes 1 to 2 working days after the photos or the original arrive, then it runs as with a file. Details on shipping & lead time.

Common questions

Can you reproduce a spare part without a file?

Yes. Send photos from all sides with a ruler or calliper in the picture and the key dimensions, or the broken original by post or to our collection point in Prenzlauer Berg. We model the part in CAD, print it and send you the STL file with it. Modelling costs €60 per started hour; brackets, clips and lids usually take one hour, gears and housing parts with several fits up to two.

What does a 3D-printed spare part cost?

The print price is weight × price per gram (PETG €0.14/g, ASA €0.17/g, TPU €0.19/g) plus print time × €1.50 plus a €3.90 base fee, net plus 19 % VAT. The minimum order is €8.90 net, i.e. €10.59 gross. Most household spare parts in PETG cost between €10.59 and €20. Without a file, add a one-off €60 per started modelling hour; every reorder costs only the print. Shipping from €4.19, pickup €2.25.

PETG or ASA: which material for my spare part?

PETG for everything indoors: tough, dimensionally stable up to 75 °C, resistant to water, oil and cleaning agents, €0.14/g. ASA for outdoors, garden, balcony and car: UV-stable, dimensionally stable up to 95 °C, €0.17/g plus €10 drying and handling per order. TPU 95A for seals, feet, bumpers and hose sleeves. PLA only for decorative parts without heat or load.

How long does a printed spare part last?

Designed properly it often outlasts the injection-moulded part that broke: we make walls 2 mm or thicker, lay the print layers across the load and print gears at 100 % infill. The limits are temperatures above 95 °C, permanent tensile load and food contact. Since the file stays with us, a new part is reordered and dispatched within 1 working day.

How fast do I get the spare part?

With a file: dispatched within 1 working day of payment, DHL takes 1 to 2 working days; express leaves us the same working day (+€50); pickup in Berlin Prenzlauer Berg is often possible the next day. Without a file: modelling usually takes 1 to 2 working days after the photos or the original arrive, then it runs as with a file.

What happens to the file after the reproduction?

It is yours. We send the STL with the delivery and you can have it printed anywhere. We keep it for six months so you can reorder without a new upload; on request we delete it right after delivery. It is never passed on.

Recommended

Indoors
PETG, 50 %
Outdoors / car
ASA, 50 %
Gear
PETG, 100 %, 0.12 mm
Flexible
TPU 95A
Wall
from 2 mm

Without a file: what we need

  • Photos from all sides, ruler in the picture
  • Length, hole spacing, diameter
  • Appliance brand and model
  • Or the original by post

€60 per started hour

Upload a file Send a photo

Have a spare part reproduced

Upload a file and see the price, or send photos and get a quote.

Upload a file