What are the options for a discontinued part?
There are three: spare-parts dealers, used parts and a 3D-printed remake. The remake is the only option that does not depend on leftover stock somewhere.
Step 1: photograph the part
Photograph the part from all six sides, straight on, with a ruler or calliper right next to it. Proportions and dimensions can then be read from the picture.
- Bright, even light, plain background, no flash.
- Put broken pieces together, and photograph them separately too.
- One photo of where the part sits and one of the rating plate (brand, model).
- Close-ups of inner faces, snap hooks and holes.
Step 2: measure the part
Measure with a calliper to 0.1 mm: outer dimensions, holes, wall thicknesses and every spot where the part meets another. A ruler is enough for a price indication, not for a fit.
- Outer dimensions: length, width, height, or diameter for round parts.
- Holes and shafts: inner diameter with the inside jaws, depth with the depth rod. For D-shaped shafts also the size across the flat.
- Mating features: measure the counterpart too, such as the shaft, slot or housing. The counterpart is not worn.
- Walls and snap hooks: thickness, length and hook height.
- Gears: tooth count, outer diameter, width, bore.
- Threads: outer diameter and pitch, or name the matching screw (for example M4).
Write the dimensions into a hand sketch or onto a photo. No calliper at hand: send the original.
Illustration: taking the outer diameter with a calliper.
Step 3: send or drop off the original
The most accurate replacement comes from the original itself. We measure it and model to the real dimensions. You receive a binding quotation once the part is with us; from photos we give a price indication first.
Send to: Mensch Creative GmbH, Fröbelstr. 11c, 10405 Berlin. Drop-off and pickup at the same collection point in Prenzlauer Berg. The original is returned with the replacement.
Step 4: choose a material
PETG suits most replacement parts: tough, moisture-proof, stable up to about 75 °C. Use ASA for parts outdoors, in cars or near heat, and TPU for seals, bumpers and caps.
What does a remake cost?
A remade household part usually costs €82 to €165 incl. VAT for the first piece: 1 to 2 hours of modelling at €60 net per started hour plus €10.59 to €20 for the print. Every further copy costs only the print.
With an existing STL, 3MF, OBJ or STEP file there is no modelling. The price appears immediately in the calculator. All prices: pricing with worked examples.
How long does it take?
Price indication within 24 hours of receiving photos or the original. After your approval, dispatch within one working day for materials in stock; DHL takes 1 to 2 working days.
What works well, and what does not
Knobs, clips, lids, gears, holders, guides, caps and housing parts up to 30 × 32 × 32 cm remake well. FDM printing is not suited to crystal-clear parts, details under 1 mm or parts that sit above 95 °C continuously.
We do not remake safety-critical parts, for example on brakes, gas appliances or load-bearing joints.
Common questions
How can I get a broken plastic part replaced if the manufacturer no longer sells it?
Have it remade. Send photos with measurements, or the original part. We model it in CAD and 3D print it in PETG, ASA or TPU. Modelling costs €60 net per started hour, and printing a typical household part costs €10.59 to €20 incl. VAT. We ship across Germany and offer pickup in Berlin.
Does it work without a 3D file?
Yes. Photos from all sides with a ruler or calliper in the frame plus the key dimensions are enough for a price indication. The most accurate result comes from sending or dropping off the original.
How much does a remade replacement part cost?
Two items: modelling at €60 net per started hour, usually 1 to 2 hours, and printing from €10.59 incl. VAT. A 22 g PETG gear costs €13.48 incl. VAT to print. Every further copy costs only the print.
Will the printed part last as long as the original?
With the right material and walls of 2 mm or more, usually yes. PETG is tough and holds its shape up to about 75 °C; ASA up to about 95 °C and is UV-resistant. Many originals break at thin spots, which we reinforce in the model.
FDM or resin: which is better for replacement parts?
FDM for functional parts. FDM parts in PETG or ASA are tough and take load. Resin prints show finer detail and smoother surfaces but are more brittle. We print with FDM.
How long does it take?
You get a price indication within 24 hours of us receiving photos or the original. After your approval the part is dispatched within one working day for materials in stock. DHL takes 1 to 2 working days within Germany.
Which files can I send?
If you have a 3D file: STL, 3MF, OBJ or STEP, and the calculator shows the price immediately. Without a file: photos as JPG or PNG plus dimensions as text or a sketch.
Do I get the file?
Yes, on request you receive the model as STL or STEP. We keep the file for six months for reorders and delete it immediately on request.
Can I pick the part up in Berlin?
Yes, at the collection point at Fröbelstraße 11c in Prenzlauer Berg for €2.25. DHL shipping within Germany starts at €4.19.